pH Sensor for Tank (PHH-1)

The TrolMaster pH Tank Sensor (PHH-1) is a reliable solution for monitoring water pH in controlled environments. Designed to integrate with the Aqua-X system (NFS-1), its versatility and easy integration enable perfect harmony in hydroponics systems, aquariums and laboratories.

Features of the pH Tank Sensor (PHH-1):

This sensor stands out for its ease of use. The pH probe (PPH-1) is equipped with a 3.6 metre cable, allowing flexible placement according to the specific needs of the environment. Its BNC terminal enables direct connection to the sensor board (AMP-2), ensuring seamless integration with the Aqua-X system.

To calibrate the pH probe using 7.0 and 4.0 solutions, first submerge the probe in the freshly prepared pH 7.0 solution. Gradually, withdraw the probe and allow it to rest for 2 minutes in the solution. After this time, the probe reading should oscillate between 6.9 and 7.1; if it falls outside this range, calibration is necessary.

Go to the menu and select system configuration, then choose the calibration/pH option. Perform calibration at pH 7.0 and press ENTER. It is recommended to also perform calibration at pH 4.0. Repeat steps 1 to 4 to complete this additional calibration.

Once you have performed calibration at one or two points (7.0 and 4.0), the probe will be considered calibrated and should provide accurate readings.

Technical Specifications of the pH Tank Sensor (PHH-1):

• Manufacturer: TrolMaster
• Package contents: 1 pH tank sensor
• 3.6 metre long cable
• Working environment: Adapts to temperatures between 32 and 122°F, with humidity below 90%
• Dimensions: 275 mm long, 85 mm wide and 95 mm high