Digital pH Meter Tester pH-600 ECO

The budget digital pH metre PH600 is an economical and very easy-to-use metre. It offers fast readings and accurate values so we can adjust the irrigation solution.

Suitable for multiple applications, watering and hydroponics, agriculture, pools, laboratories, food, etc.

Its operation is straightforward:

1. Remove the black protective cap and turn on the metre.
2. Submerge it up to the limit and wait for the reading to stabilise.
3. After use, rinse the electrode with water to keep it clean.
4. Preserve the electrode by putting a few drops of storage liquid/solution or pH 7.0 calibration liquid in the cap. 
5. Always replace the cap after use.

Calibration of the pH metre:

1. Submerge the electrode up to the limit in pH 7.01 calibration liquid.
2. Wait for the reading to stabilise and adjust to pH 7.0 with the screwdriver on the screw at the back.
3. The metre is now calibrated.

Precautions:

• Do not use distilled or deionised water for storage.
• Large reading differences (≈0.5 pH) may be due to need for calibration, dry electrode or low batteries.
• Always use fresh calibration liquids.
• Rinse the electrode with tap water after each use. From time to time, gently brush the glass bulb and transparent tape with a soft toothbrush.
• Soak for 24 hours in cleaning solution every 3 months.

Specifications of Digital pH Metre Tester PH-600 ECO:

• Digital pH Metre Tester PH-600 ECO
• Manufacturer: Milwaukee
• Range: 0.0 - 14.0pH
• Resolution: 0.1pH
• Accuracy: 0.1pH
• Operating temperatures: 0 - 50°C
• Batteries: 3x 1.5V