Digital CO2 Controller (With Probe) VDL

A digital controller with probe that is very easy to use, with a 4.5 metre cable length that will allow you to keep CO2 levels controlled in your indoor cannabis cultivation.

This CO2 meter with external probe ensures accurate measurement of the parts per million (ppm) released in your grow room. The prestigious VDL brand offers on this occasion a CO2 meter with two outlets, one connecting to mains electricity and another allowing you to connect it to the extractor so it can function automatically should CO2 levels need to be reduced in your cultivation.

It offers great safety as it has a fuse to protect the controller from possible short circuits, voltage spikes and overheating – the maximum protection available on the market.

If connected in automatic mode, the meter can switch off the CO2 generator at night, and when it detects light it will turn it back on, maintaining the correct parameters on its own. It also has a fuse that protects the generator if necessary.

If we do not follow the recommended CO2 values in ppm we can negatively affect our cultivation. In the case of pre-flowering, if levels are excessively high we can cause the plant to stretch too much. In the case of flowering, the correct measurements will give us large, compact buds full of resin, but if the value is not correct it can result in a loss of flavour and aroma that will make your harvest mediocre.

Recommended CO2 values according to cultivation phase:

• Growth: 600 - 800ppm
• Pre-flowering: 400ppm
• Flowering: 1200ppm

Digital CO2 controller with VDL probe characteristics:

• Brand: VDL
• Model: Digital
• Power: 240 VAC
• Size: 158x106x50 mm
• Weight: 700 g
• Probe size: 124x33x26 mm
• Probe cable length: 4.5 m
• Display: LCD
• Display size: 47x104 mm
• Measurement range: 0 - 5000 ppm
• Setup time: 30 seconds
• Accuracy: CO2 below 3000 ppm has an error of ±5% / CO2 above 3000 ppm error of ±7%
• Accuracy 2 channels low drift NDIR CO2 measurement
• Data recovery function
• Programmable hysteresis zone value
• Programmable centre value
• Alarm warning of excessive CO2 concentration
• Adjustable timescale (week/day/hour/minute/automatic)
• Automatic Day/Night detection
• Backlight for comfortable device operation in dark places

Digital CO2 controller with VDL sensor specifications:

• Digital CO2 meter with sensor
• Instruction manual
• Screws and tape