Description
Volcano Classic Onyx is the limited edition of the Volcano Classic desktop vaporiser that Storz & Bickel launched in September 2021, with a matte black housing and a wear-resistant powder coating. The logo and lettering in white stand out against the black.
Development of the Volcano began in 1996, in Markus Storz's basement, and the first units were sold in 2000. Every device, including this edition, is hand-assembled in Germany with the same purely electromechanical design.
Pure convection and Easy Valve balloon
The Volcano Classic Onyx heats air and a pump passes it through the filling chamber, so the herb is vaporised by convection alone, without combustion. The vapour accumulates in a detachable balloon that is inhaled with virtually no resistance.
Notice how smooth the vapour arrives with the Easy Valve balloon: its large surface cools it as it fills, so you can inhale as soon as it's done. It's made of food-grade material, heat-resistant and BPA-free.
One analogue dial and two switches
Temperature is set with a 9-level dial, from 130 to 230 °C, and the HEAT switch turns on the heater. A yellow light goes out when it reaches temperature, which takes about 5 minutes at 180 °C.
With the chamber loaded with ground herb and the balloon fitted, the AIR switch starts the pump that fills it. You'll just need to turn it off, separate the balloon from the chamber and attach the mouthpiece, which closes itself when you stop pressing.
Differences from the standard Classic and Hybrid
The Volcano Classic Onyx shares mechanics, chamber and accessories with the standard Classic, and differs only in finish and limited run. The Volcano Hybrid is the digital version, with touchscreen, app-based adjustment, heating in about 40 seconds and the option to inhale through a tube.
Cleaning and spare parts
Storz & Bickel recommends changing the balloon and mouthpiece every two weeks for hygiene, and each balloon should be used by one person only. Replacement balloons come in the Easy Valve replacement kit, with six units.
The filling chamber is cleaned with isopropyl alcohol or warm soapy water, and the air filter at the base should be checked every four weeks. Clips, cap rings and Ø 30 mm meshes are in the wear parts kit.
If you prefer to cut balloons to size, the Volcano Classic Onyx also accepts the Solid Valve Set. It has more metal parts than the Easy Valve and requires more frequent cleaning.
Volcano Classic Onyx Technical Specifications
- Manufacturer: Storz & Bickel
- Model: Volcano Classic, Onyx limited edition (2021)
- Finish: matte black with powder coating
- Heating: convection
- Temperature range: 130–230 °C
- Temperature control: 9-level analogue dial
- Heating time: approx. 5 minutes (180 °C)
- Inhalation: Easy Valve balloon
- Filling chamber: 6.5 cm³ (approx. 600 mg)
- Power supply: fixed mains cable
- Dimensions: 20 x 18 x 20 cm
- Weight: 1.6 kg
- Suitable for: dried herbs
- Warranty: 2 years
- Additional warranty: 1 more year by registering the device on the Storz & Bickel website
- Made in: Germany
The package includes:
- 1 x Volcano Classic Onyx
- 4 x Easy Valve balloon with mouthpiece
- 1 x Easy Valve balloon with adapter
- 1 x Filling chamber
- 3 x Clip for filling chamber
- 1 x Cap ring
- 1 x Set of standard meshes (Ø 30 mm approx.)
- 1 x Set of air filters
- 1 x Herb grinder (Ø 59 mm approx.)
- 1 x Cleaning brush
- 1 x Instructions for use











