Description
Volcano Classic was the first vaporiser from Storz & Bickel and is operated with a temperature dial and two switches, with no display or app. It went on sale in 2000, a year after its detachable balloon patent was granted, and continues to be hand-made in Tuttlingen (Germany).
How the Volcano vaporiser works
Inside the cone, an air pump pushes air through a heat exchanger that brings it to the chosen temperature, and from there it passes into the filling chamber. Heat reaches the herb only through the air (pure convection), with no contact with the heating element, and the resulting vapour rises into the balloon.
You choose the temperature, switch on HEAT and wait for the yellow pilot light to go out (at 180 °C it takes about five minutes). Then you load the chamber with ground herb, fit the balloon and press AIR: the pump fills it and the valve closes when you remove it.
The pilot light comes back on each time the heater recovers temperature, and the air can vary by around ±5 °C from the dial setting. For finer adjustment there is the digital control on the Hybrid.
Easy Valve as standard and Solid Valve as an alternative
The Volcano Classic comes with the Easy Valve system: balloons with the valve already fitted, four with a mouthpiece and one with an adapter. According to Storz & Bickel, it has fewer metal parts where vapour can condense and a wider chamber that lets air pass better, so it needs less cleaning.
For working with custom-cut balloons there is the Solid Valve Set, which replaces the filling chamber and valve. As it accumulates more condensation, it needs more frequent cleaning.
Other Volcano models: Hybrid and Onyx edition
Compared to the Volcano Hybrid, the Classic forgoes the touchscreen and app in favour of mechanical operation, and takes about 5 minutes to heat up where the Hybrid needs about 40 seconds. The Hybrid combines convection and conduction and supports a tube as well as a balloon.
The Volcano Classic Onyx is this same device in limited edition, with a matte black casing and powder coating. It works the same way and uses the same spare parts.
Which parts are replaced with use
Storz & Bickel indicates in their technical support what to check and how often:
- Balloon and mouthpiece: renewed every two weeks for hygiene reasons and are for individual use. The Easy Valve replacement kit replaces both at once, with six balloons that come with their mouthpiece.
- Air filter: it is under the device, behind a cap that twists, and should be checked every four weeks.
- Filling chamber: isopropyl alcohol with paper or cotton, or warm water with washing-up liquid. Its clips, the lid ring and screens come in the wear parts set.
- Casing: only a damp cloth, with no abrasive products.
Volcano Classic Technical Specifications
- Manufacturer: Storz & Bickel
- Model: Volcano Classic
- Heating: convection
- Temperature range: 130–230 °C
- Temperature control: 9-level analogue dial
- Heat-up time: approx. 5 minutes (180 °C)
- Inhalation: Easy Valve balloon
- Filling chamber: 6.5 cm³ (approx. 600 mg)
- Power: fixed mains cable
- Dimensions: 20 x 18 x 20 cm
- Weight: 1.6 kg
- Suitable for: dry herbs
- Warranty: 2 years
- Additional warranty: 1 more year by registering the device on the Storz & Bickel website
- Made in: Tuttlingen (Germany)
The package includes:
- 1 x Volcano Classic
- 4 x Easy Valve balloon with mouthpiece
- 1 x Easy Valve balloon with adapter
- 1 x Filling chamber
- 3 x Clip for filling chamber
- 1 x Lid ring
- 1 x Set of standard screens (Ø 30 mm approx.)
- 1 x Set of air filters
- 1 x Herb grinder (Ø 59 mm approx.)
- 1 x Cleaning brush
- 1 x User instructions











