Description
VENTY is the most powerful portable vaporiser from Storz & Bickel and, according to the brand, the first to allow you to regulate air flow from 0 to 20 litres per minute. It is manufactured in Germany with their patented combination of convection and conduction heating, now in a new mini heater.
Air flow wheel and heating in 20 seconds
The adjustment wheel moves continuously and clicks into three positions: low, medium and high flow, the latter at 20 l/min. A flow meter detects the strength of each inhalation and adapts the heating to it.
Enjoy the flavour from the first inhalation: the mini heater reaches temperature in around 20 seconds. Afterwards, the labyrinth cooling unit lowers the vapour temperature before it reaches the mouthpiece.
Temperature degree by degree, Booster and Superbooster
With the + and – buttons you set the temperature degree by degree between 40 and 210 °C, and the display changes from orange to green with a double vibration when ready. A double press of the power button activates Booster (+15 °C) and another press activates Superbooster (+30 °C), which return to base temperature automatically after 90 seconds.
The S&B Web App (Bluetooth, from your browser) is optional: it saves your temperatures and boosters, adjusts brightness and vibration, activates ECO charging and updates the firmware. When not in use, the VENTY switches off automatically after 2 minutes.
Batteries and USB-C charging
Inside it carries two 18650 lithium-ion batteries that deliver up to 130 W. With Storz & Bickel's USB-C Supercharger, sold separately, you charge 80% in around 40 minutes; only the USB-C cable comes in the box.
The VENTY cannot be used while charging, because during operation it consumes more than 100 W, more than a USB-C charger provides. To extend battery life, you can activate ECO charging mode.
Tank filling and cleaning
To fill the 1.4 cm³ tank with ceramic coating, you rotate the cooling unit 90°, load ground herb to the brim without pressing it and close it again. If you prefer to carry pre-prepared doses, it accepts single-dose capsules from the 8-capsule tank, although these reduce air flow slightly.
The tank and cooling unit meshes are brushed after each use. For thorough cleaning, the disassembled cooling unit and tank mesh should be soaked for at least five minutes in warm water with detergent or up to half an hour in isopropyl alcohol; then rinse and leave to dry.
Other Storz & Bickel models
The Mighty+ shares temperature range, 1.4 cm³ tank and supercharge, but takes around a minute to heat and has an air flow of 10 l/min. It is shorter and wider (11 x 8 cm versus 15.7 x 4.7 cm) and weighs 242 g, compared to 252 g for the VENTY.
If you are looking for something lighter, the Veazy weighs 134 g and heats in around 40 seconds, with an air flow of up to 10 l/min.
The Crafty+ weighs 135 g and takes between 60 and 80 seconds to reach 180 °C.
VENTY Technical Specifications
- Manufacturer: Storz & Bickel
- Model: VENTY
- Heating: convection and conduction
- Temperature range: 40–210 °C
- Booster and Superbooster: +15 °C and +30 °C
- Heating time: approx. 20 s
- Air flow: adjustable up to 20 l/min
- Tank: 1.4 cm³ with ceramic coating
- Batteries: 2 x 18650 lithium-ion
- Maximum power: 130 W
- Charging: USB-C, 80% in approx. 40 min with USB-C Supercharger (not included)
- Use while charging: no
- Control: buttons, LC display and S&B Web App (Bluetooth)
- Automatic shutdown: after 2 minutes of non-use
- Certification: UL 8139 and IEC 60335-1
- Dimensions: 15.7 x 4.7 x 3.7 cm
- Weight: 252 g
- Suitable for: dried herbs
- Warranty: 2 years
- Additional warranty: 1 more year by registering the device on the Storz & Bickel website
- Manufactured in: Germany
The package includes:
- 1 x VENTY Vaporiser
- 1 x USB-C Cable (USB-C/USB-C)
- 1 x Tank tool
- 2 x Small normal mesh
- 3 x Small coarse mesh
- 2 x Cooling unit mesh
- 2 x O-ring Ø 9 x 1.5 mm
- 1 x Cleaning brush
- 1 x Quick start instructions











