
Signed out
See you soon.
Accesorios Rosin: Dabbers, Papel y Bolsas
All the tools and accessories you need for pressing: titanium and steel dabbers, non-stick paper, mesh bags by micron size, silicone moulds and containers for storing extract.
In this category you'll find all the essential Rosin accessories and tools for clean, safe and effective extraction. Extracting Rosin is a straightforward process, whether you use a manual or hydraulic press: having the right materials makes all the difference to Rosin yield and quality.
Titanium and stainless steel dabbers
Freshly extracted material is sticky and absorbs any impurity, so it's handled with a tool and never with your fingers. The difference between materials is practical: titanium doesn't transfer flavour and withstands direct heat, so it's the material to choose if you're going to apply the extract hot; stainless steel costs less and is sufficient for dosing and collecting cold.
We stock 14 models, from straight tips of 12.1 and 15.4 cm to the combined pieces from Happy Daddy, which feature a tip and blade on the same tool for scraping plates and loading without changing implements. For a neat workbench, Empire Glassworks glass dabbers add decorative finish to the same use.
Rosin mesh bags: micron size matters
The micron count determines what passes through the mesh, and is chosen based on how fine your starting material is, not by preference. We cover 25 to 220 µm:
- 25–45 µm for fine hash and dry sift, when you're after maximum purity.
- 90–120 µm for dry flower, which is the most common use.
- 160–220 µm for coarse material or trim: more yield, less purity.
The Qnubu Rosin Mesh Bags come in 11×5 and 11×11 cm so the bag fits your plate without wasting surface, and the 12×12 cm mesh works equally well for rosin or BHO extractions.
Pressing paper and plate tools
Paper is the part that gets changed most often and causes the most failures. It must be food-safe, heat-resistant and silicone-free, as silicones contaminate the extract at working temperature. Graveda Rosin Paper comes in 30×30 cm sheets and RAW Parchment Paper comes in a roll, from small formats up to 40 cm wide, so you can cut to exact size.
Around the paper there are three accessories that solve specific problems: the Secret Smoke Rosin Mould keeps material centred and prevents burrs, the paper magnet holds it to the plate so it doesn't shift when closing, and the cooling plate cuts the temperature right as it comes out, which is when the most terpenes are lost. Nitrile gloves complete the basic kit: you're working with surfaces at 100 °C.
Silicone jars and mats for storing extract
Rosin degrades with air, light and heat, so the container is part of the result. Qnubu silicone jars range from 6 to 34 ml, with stackable versions to separate batches, keychain versions for carrying doses and hexagonal versions to stack in the cold, and being non-stick you recover the contents without leaving residue. For working on a bench, the Qnubu Silicone Mat is reusable and lets you peel the concentrate cleanly off the surface.
If you don't have equipment yet, Rosin Presses has hydraulic and manual models, and Dry Extractions has the material to get the kief you'll press afterwards. More techniques in Resin Extraction.
Frequently asked questions about Rosin accessories
Titanium or steel dab tool?
Titanium if you're going to apply direct heat to the tool, because it doesn't alter the flavour. Stainless steel if you're only collecting and dosing cold: it works just as well and costs less.
What micron bag size do I need?
90–120 µm for flower and 25–45 µm for hash or kief. If in doubt, start with 90 µm, which is the most forgiving range for varied material.
Can mesh bags be reused?
It's not advisable. The mesh becomes clogged with plant matter and the seam gives way under pressure, risking a burst and mixing debris into the next batch.






















