Lumatek LED Attis 200W 2.5 µmol/J PRO

Attis PRO 200W by Lumatek is the full spectrum line that represents the perfect combination of light quality and quantity for indoor plant cultivation. It is the natural evolution of the LED Attis 200W a line with great success in the European market, now with additional features of controller compatibility and moisture protection (IP65).

Features of the Lumatek LED Attis 200W PRO:

The Attis 200W Pro LED generates a high PPF of 508 µmol/s with a photon efficiency of 2.5 µmol/J, suitable for covering cultivation areas up to 0.8x0.8 metres. It incorporates quality Lumatek controllers and next-generation diodes in white, red and far-red spectra, uniformly distributed across the light bars for greater propagation and a wide, homogeneous light footprint. With this combination of diodes, a highly efficient light source is achieved and calibrated to provide high intensity, stable and uniform output for better absorption. Similarly, it greatly extends the lifespan of the diodes, which can reach up to 60,000 hours

This system includes a power regulator that allows you to regulate the intensity at 0, 25%, 50%, 75% and 100%, but can be controlled more precisely through a lighting controller (not included in this product).

Lumatek's innovative design allows these LED lights to cool passively, thus eliminating the noise associated with ventilation systems. In addition, the ATS Pro line features an IP65 rating and uses Clear Glue protective cover technology to provide 99% light transmission without loss, extended diode lifespan and greater corrosion resistance.

Lumatek ATS Pro LED luminaires are fully compatible with the Lumatek Digital Panel Plus 2.0 or any control system that uses a 0-10V output signal, even if your universal controller has an RJ port interface, thanks to an RJ signal converter to 0-10V control adapter.

How to install the Lumatek LED Attis 200W PRO:

Installation of the Lumatek LED Attis 200W PRO is straightforward and can be completed in just a few steps:

1. Choose the right location for the device considering the size of the cultivation area and your plants' needs.
2. Secure the Lumatek LED Attis 200W PRO in place using the included mounting kit, ensuring it is level and secure.
3. Connect the device's power cable to a compatible power socket following the manual instructions.
4. Adjust the spectrum settings and light duration according to your plants' life cycle using the digital controller.
5. Perform regular maintenance, cleaning the lenses and ensuring all components are in good condition.

Technical specifications of the Lumatek LED Attis 200W PRO:

• Efficiency: 2.5 µmol/J
• PPF: 508 µmol/s
• Input Voltage: 220-240V, 50-60Hz
• Input Power (100%): 205W
• Footprint: Up to 0.8x0.8m
• Waterproof: IP65
• Lifespan: +60,000 hours
• Light Distribution: 120°
• Light Source: white, red and far-red diodes of higher specification
• Dimmable: OFF-25%-50%-75%-100% with 0-10 V power regulator (included)
• External Control: With Lumatek Digital Panel Plus 2.0
• Weight: 4kg
• Dimensions: 524.5x524.5x71.6mm
• Spectrum: full spectrum +
• BTU: 703 BTU/h