LUMII Black LED 720W 2.6 µmol/J

The LUMII Black LED 720W is an LED lighting solution designed to optimise plant growth and flowering indoors. Its standout features make it an essential element for both professional and amateur growers.

Key Features of LUMII Black LED 720W 2.6 µmol/J:

LUMII Black Led 720W has an efficiency of 2.6 µmol/W and is dimmable, allowing us to adjust the power to 720W, 600w, 400w and 250w. This translates to exceptional light output and broad coverage for plants. Additionally, it emits a specific light spectrum designed to meet plant needs at all stages of their lifecycle, from vegetative growth to flowering.

It produces full-spectrum light that is ideal for growth and flowering. Its PPF value of 1870 µmol/s exceeds that of typical 1000W HPS lamps and approaches the values of dual-ended 1000W HPS lamps. Thanks to its design, light distribution is uniform and burn risk is considerably reduced.

It measures 110 cm x 108 cm x 5 cm, perfect for installation in marijuana grow tents of 120 cm x 120 cm or 150 cm x 150cm, and 2 units can also be installed in a 240x120x2 tent.

The LUMII BLACK LED 720W should be positioned at a height of around 30-50cm (minimum 15cm) above the plant tops using the supplied suspension. If the light is too intense for your plants and they show signs of stress, you should hang the light a bit higher or select a lower power setting on the ballast.

LUMII Black Led 720W has a lifespan of 50,000h without varying its performance and the bars have IP65 protection against dust and water.

LUMII Black Led 720W operates with electronic ballast of 600w, and can be easily installed on top of the unit using included brackets, but can also be installed at a maximum distance of 10 metres. Installing the ballast on top will emit minimal heat inside the grow tent, a very good option in winter or cold areas, in spring or summer it is a very good option to install it outside the tent but reduce temperature, plus it allows us to regulate the intensity of the unit without needing to open the tent.

How to install the LUMII Black LED 720W 2.6 µmol/J?

Light and easy to install, if hung using LUMII rope ratchets, the height of the fixture can be adjusted as your plants grow.

Installation of this LED lighting system is straightforward and can be carried out following these steps:

1. Placement: Position the LED panel at the appropriate height above your plants, typically between 45 and 60 centimetres, depending on the growth stage.

2. Electrical connection: Connect the power cable to a standard mains outlet. Since this model does not require a ballast, the electrical installation is simpler and more straightforward.

3. Switch on: Activate the LED panel using the on/off switch.

4. Light spectrum adjustment: Some models allow you to adjust the light spectrum according to your plants' specific needs, ensuring they receive optimal light quantity and quality.

Specifications of LUMII Black LED 720W:

• Manufacturer: Lumii
• Power: 720W
• LED Chips: Full-spectrum 660nm LED diodes
• Output: 1870 µmol/s
• Efficiency: 2.6 µmol/J
• Durability: L90: >50,000 hr
• Insulation: IP65
• Weight (without ballast): 7.8 kg
• Dimensions: 110cm x 108cm x 5cm
• Warranty: 2 years