Gavita Pro Series 6/750e 400V DE EU Kit

Gavita Pro Line E-Series 6/750 is a complete lighting system designed and optimised for use in high-performance horticulture.

The integration of ballast and reflector allows the development of a lighting system without external cables and very low EMI emission levels.

An integrated 400V bulb designed for high-frequency ballasts is capable of delivering higher luminous output (10 - 25%) with the same power. This type of bulb must be used in combination with open, non-ventilated reflectors and is not compatible with cooled reflectors as they can lose up to 15% efficiency.

The Gavita Pro HR 96 reflector represents a revolution in horticultural lighting. A closed reflector manufactured in Miro aluminium that offers uniform reflection with excellent light penetration from all angles (135°) and a design for overlapping with other reflectors. The Miro reflector cannot be cleaned and if it is, the reflective material can be damaged. Gavita recommends replacement every year in dusty environments or every two years in clean environments.

You can adjust the bulb power with the power selector or from the Master Controller, but remember that all new bulbs need to operate at 100% for at least 100 hours for stabilisation before dimming to ensure correct operation throughout their entire useful life.

Overlapping Plan:

Gavita Pro Line 6/750e is able to cover a surface area of 90x135cm at 75cm height in spaces where several units overlap to achieve a light level of 1000 µmol s-1 m-2.

This is a rule that works for any space with up to 20-30 units. Spaces with specific dimensions may require creative solutions; contact us and an expert will assist you in designing your room.

Other advantages of Gavita Pro Line E-Series equipment:

• Smart start-up: Only use the power required for smooth, fast start-up.
• No moving parts
• Status LED: Provides information about ballast status.
• Sealed with Gore-tex Ventilation Cap: If the ballast reaches a high temperature, the air inside the ballast expands and exits through this cap; when the ballast switches off, the cap only allows air in, without humidity or dust.
• Compatible with all Gavita Master Controllers: with sunrise/sunset function, schedule control, power regulation and maximum operating temperature control.
• Plug & Play: All installation is done by hand; you won't need any tools.

Gavita Pro Classic 1000 DE EU (400V) Specifications:

• Manufacturer: Gavita International BV
• Easy installation: Plug & Play
• Bulb included: Gavita Pro 750 W 400V EL DE HPS K12 x 30S (1.120 µmol s-1)
• Reflector: Hortistar HR 96% miro aluminium (replaceable)
• Base: K12 x 30S
• Microprocessor controlled
• Dimensions: 58.5cm (length) x 24.5cm (width) x 26.5cm (height)
• Illumination area: 90x135cm at 75cm distance
• Weight: 6.35 kg
• Operating temperature: 0 - 40°C
• Input power: 400-870W / 240V AC
• Frequency: 50-60Hz
• Current: 3.5 - 3.9 Amps
• Power factor: 0.98
• Photosynthetic efficiency: more than 1 square metre with 1,000 µmol m -2 s -1
• Includes 4m power cable with Wieland RST connector and IEC C13 outlet
• 2x RJ14 cables
• 1x Plug&play T-distributor RJ14
• Includes mounting accessories
• 3 years warranty